DFHack Plugins

DFHack plugins are the commands, that are compiled with a specific version. They can provide anything from a small keybinding, to a complete overhaul of game subsystems or the entire renderer.

Most commands offered by plugins are listed here, hopefully organised in a way you will find useful.

Data inspection and visualizers

stonesense

An isometric visualizer that runs in a second window. Usage:

stonesense:Open the visualiser in a new window. Alias ssense.
ssense overlay:Overlay DF window, replacing the map area.

For more information, see the full Stonesense README.

blueprint

Exports a portion of your fortress into QuickFort style blueprint files.:

blueprint <x> <y> <z> <name> [dig] [build] [place] [query]

Options (If only region and name are given, export all):

x,y,z:Size of map area to export
name:Name of export files
dig:Export dig commands to “<name>-dig.csv”
build:Export build commands to “<name>-build.csv”
place:Export stockpile commands to “<name>-place.csv”
query:Export query commands to “<name>-query.csv”

Goes very well with fortplan, for re-importing.

remotefortressreader

An in-development plugin for realtime fortress visualisation. See Armok Vision.

cursecheck

Checks a single map tile or the whole map/world for cursed creatures (ghosts, vampires, necromancers, werebeasts, zombies).

With an active in-game cursor only the selected tile will be observed. Without a cursor the whole map will be checked.

By default cursed creatures will be only counted in case you just want to find out if you have any of them running around in your fort. Dead and passive creatures (ghosts who were put to rest, killed vampires, ...) are ignored. Undead skeletons, corpses, bodyparts and the like are all thrown into the curse category “zombie”. Anonymous zombies and resurrected body parts will show as “unnamed creature”.

Options:

detail:Print full name, date of birth, date of curse and some status info (some vampires might use fake identities in-game, though).
nick:Set the type of curse as nickname (does not always show up in-game, some vamps don’t like nicknames).
all:Include dead and passive cursed creatures (can result in a quite long list after having FUN with necromancers).
verbose:Print all curse tags (if you really want to know it all).

Examples:

cursecheck detail all
Give detailed info about all cursed creatures including deceased ones (no in-game cursor).
cursecheck nick
Give a nickname all living/active cursed creatures on the map(no in-game cursor).

Note

If you do a full search (with the option “all”) former ghosts will show up with the cursetype “unknown” because their ghostly flag is not set.

Please report any living/active creatures with cursetype “unknown” - this is most likely with mods which introduce new types of curses.

flows

A tool for checking how many tiles contain flowing liquids. If you suspect that your magma sea leaks into HFS, you can use this tool to be sure without revealing the map.

probe

Can be used to determine tile properties like temperature.

prospect

Prints a big list of all the present minerals and plants. By default, only the visible part of the map is scanned.

Options:

all:Scan the whole map, as if it was revealed.
value:Show material value in the output. Most useful for gems.
hell:Show the Z range of HFS tubes. Implies ‘all’.

If prospect is called during the embark selection screen, it displays an estimate of layer stone availability.

Note

The results of pre-embark prospect are an estimate, and can at best be expected to be somewhere within +/- 30% of the true amount; sometimes it does a lot worse. Especially, it is not clear how to precisely compute how many soil layers there will be in a given embark tile, so it can report a whole extra layer, or omit one that is actually present.

Options:

all:Also estimate vein mineral amounts.

reveal

This reveals the map. By default, HFS will remain hidden so that the demons don’t spawn. You can use reveal hell to reveal everything. With hell revealed, you won’t be able to unpause until you hide the map again. If you really want to unpause with hell revealed, use reveal demons.

Reveal also works in adventure mode, but any of its effects are negated once you move. When you use it this way, you don’t need to run unreveal.

Usage and related commands:

reveal:Reveal the whole map, except for HFS to avoid demons spawning
reveal hell:Also show hell, but requires unreveal before unpausing
reveal demon:Reveals everything and allows unpausing - good luck!
unreveal:Reverts the effects of reveal
revtoggle:Switches between reveal and unreveal
revflood:Hide everything, then reveal tiles with a path to the cursor (useful to make walled-off rooms vanish)
revforget:Discard info about what was visible before revealing the map. Only useful where (eg) you abandoned with the fort revealed and no longer want the data.

showmood

Shows all items needed for the currently active strange mood.

Bugfixes

fix-unit-occupancy

This plugin fixes issues with unit occupancy, notably phantom “unit blocking tile” messages (Bug 3499). It can be run manually, or periodically when enabled with the built-in enable/disable commands:

(no argument):Run the plugin once immediately, for the whole map.
-h, here, cursor:
 Run immediately, only operate on the tile at the cursor
-n, dry, dry-run:
 Run immediately, do not write changes to map
interval <X>:Run the plugin every X ticks (when enabled). The default is 1200 ticks, or 1 day. Ticks are only counted when the game is unpaused.

fixveins

Removes invalid references to mineral inclusions and restores missing ones. Use this if you broke your embark with tools like tiletypes, or if you accidentally placed a construction on top of a valuable mineral floor.

petcapRemover

Allows you to remove or raise the pet population cap. In vanilla DF, pets will not reproduce unless the population is below 50 and the number of children of that species is below a certain percentage. This plugin allows removing the second restriction and removing or raising the first. Pets still require PET or PET_EXOTIC tags in order to reproduce. Type help petcapRemover for exact usage. In order to make population more stable and avoid sudden population booms as you go below the raised population cap, this plugin counts pregnancies toward the new population cap. It can still go over, but only in the case of multiple births.

Usage:

petcapRemover:cause pregnancies now and schedule the next check
petcapRemover every n:
 set how often in ticks the plugin checks for possible pregnancies
petcapRemover cap n:
 set the new cap to n. if n = 0, no cap
petcapRemover pregtime n:
 sets the pregnancy duration to n ticks. natural pregnancies are 300000 ticks for the current race and 200000 for everyone else

tweak

Contains various tweaks for minor bugs.

One-shot subcommands:

clear-missing:Remove the missing status from the selected unit. This allows engraving slabs for ghostly, but not yet found, creatures.
clear-ghostly:Remove the ghostly status from the selected unit and mark it as dead. This allows getting rid of bugged ghosts which do not show up in the engraving slab menu at all, even after using clear-missing. It works, but is potentially very dangerous - so use with care. Probably (almost certainly) it does not have the same effects like a proper burial. You’ve been warned.
fixmigrant:Remove the resident/merchant flag from the selected unit. Intended to fix bugged migrants/traders who stay at the map edge and don’t enter your fort. Only works for dwarves (or generally the player’s race in modded games). Do NOT abuse this for ‘real’ caravan merchants (if you really want to kidnap them, use ‘tweak makeown’ instead, otherwise they will have their clothes set to forbidden etc).
makeown:Force selected unit to become a member of your fort. Can be abused to grab caravan merchants and escorts, even if they don’t belong to the player’s race. Foreign sentients (humans, elves) can be put to work, but you can’t assign rooms to them and they don’t show up in DwarfTherapist because the game treats them like pets. Grabbing draft animals from a caravan can result in weirdness (animals go insane or berserk and are not flagged as tame), but you are allowed to mark them for slaughter. Grabbing wagons results in some funny spam, then they are scuttled.

Subcommands that persist until disabled or DF quits:

adamantine-cloth-wear:
 

Prevents adamantine clothing from wearing out while being worn (Bug 6481).

advmode-contained:
 

Works around Bug 6202, custom reactions with container inputs in advmode. The issue is that the screen tries to force you to select the contents separately from the container. This forcefully skips child reagents.

block-labors:

Prevents labors that can’t be used from being toggled

civ-view-agreement:
 

Fixes overlapping text on the “view agreement” screen

craft-age-wear:

Fixes the behavior of crafted items wearing out over time (Bug 6003). With this tweak, items made from cloth and leather will gain a level of wear every 20 years.

embark-profile-name:
 

Allows the use of lowercase letters when saving embark profiles

eggs-fertile:

Displays a fertility indicator on nestboxes

farm-plot-select:
 

Adds “Select all” and “Deselect all” options to farm plot menus

fast-heat:

Further improves temperature update performance by ensuring that 1 degree of item temperature is crossed in no more than specified number of frames when updating from the environment temperature. This reduces the time it takes for stable-temp to stop updates again when equilibrium is disturbed.

fast-trade:

Makes Shift-Down in the Move Goods to Depot and Trade screens select the current item (fully, in case of a stack), and scroll down one line.

fps-min:

Fixes the in-game minimum FPS setting

hide-priority:

Adds an option to hide designation priority indicators

import-priority-category:
 

Allows changing the priority of all goods in a category when discussing an import agreement with the liaison

kitchen-keys:

Fixes DF kitchen meal keybindings (Bug 614)

kitchen-prefs-color:
 

Changes color of enabled items to green in kitchen preferences

kitchen-prefs-empty:
 

Fixes a layout issue with empty kitchen tabs (Bug 9000)

max-wheelbarrow:
 

Allows assigning more than 3 wheelbarrows to a stockpile

military-color-assigned:
 

Color squad candidates already assigned to other squads in yellow/green to make them stand out more in the list.

../_images/tweak-mil-color.png
military-stable-assign:
 

Preserve list order and cursor position when assigning to squad, i.e. stop the rightmost list of the Positions page of the military screen from constantly resetting to the top.

nestbox-color:

Fixes the color of built nestboxes

shift-8-scroll:

Gives Shift-8 (or *) priority when scrolling menus, instead of scrolling the map

stable-cursor:

Saves the exact cursor position between t/q/k/d/b/etc menus of fortress mode.

title-start-rename:
 

Adds a safe rename option to the title screen “Start Playing” menu

tradereq-pet-gender:
 

Displays pet genders on the trade request screen

fix-armory

This plugin requires a binpatch, which has not been available since DF 0.34.11

UI Upgrades

Note

In order to avoid user confusion, as a matter of policy all GUI tools display the word DFHack on the screen somewhere while active.

When that is not appropriate because they merely add keybinding hints to existing DF screens, they deliberately use red instead of green for the key.

automelt

When automelt is enabled for a stockpile, any meltable items placed in it will be designated to be melted. This plugin adds an option to the q menu when enabled.

autotrade

When autotrade is enabled for a stockpile, any items placed in it will be designated to be taken to the Trade Depot whenever merchants are on the map. This plugin adds an option to the q menu when enabled.

command-prompt

An in-game DFHack terminal, where you can enter other commands. Best used from a keybinding; by default CtrlShiftP.

Usage: command-prompt [entry]

If called with an entry, it starts with that text filled in. Most useful for developers, who can set a keybinding to open a laungage interpreter for lua or Ruby by starting with the :lua or :rb commands.

Otherwise somewhat similar to gui/quickcmd.

../_images/command-prompt.png

hotkeys

Opens an in-game screen showing which DFHack keybindings are active in the current context.

../_images/hotkeys.png

Type hotkeys into the DFHack console to open the screen, or bind the command to a globally active hotkey. The default keybinding is CtrlF1. See also hotkey-notes.

rb

Ruby language plugin, which evaluates the following arguments as a ruby string. Best used as :rb [string], for the special parsing mode. Alias rb_eval.

manipulator

An in-game equivalent to the popular program Dwarf Therapist.

To activate, open the unit screen and press l.

../_images/manipulator.png

The far left column displays the unit’s Happiness (color-coded based on its value), Name, Profession/Squad, and the right half of the screen displays each dwarf’s labor settings and skill levels (0-9 for Dabbling through Professional, A-E for Great through Grand Master, and U-Z for Legendary through Legendary+5).

Cells with teal backgrounds denote skills not controlled by labors, e.g. military and social skills.

../_images/manipulator2.png

Press t to toggle between Profession and Squad view.

../_images/manipulator3.png

Use the arrow keys or number pad to move the cursor around, holding Shift to move 10 tiles at a time.

Press the Z-Up (<) and Z-Down (>) keys to move quickly between labor/skill categories. The numpad Z-Up and Z-Down keys seek to the first or last unit in the list. Backspace seeks to the top left corner.

Press Enter to toggle the selected labor for the selected unit, or Shift+Enter to toggle all labors within the selected category.

Press the +- keys to sort the unit list according to the currently selected skill/labor, and press the */ keys to sort the unit list by Name, Profession/Squad, Happiness, or Arrival order (using Tab to select which sort method to use here).

With a unit selected, you can press the v key to view its properties (and possibly set a custom nickname or profession) or the c key to exit Manipulator and zoom to its position within your fortress.

The following mouse shortcuts are also available:

  • Click on a column header to sort the unit list. Left-click to sort it in one direction (descending for happiness or labors/skills, ascending for name, profession or squad) and right-click to sort it in the opposite direction.
  • Left-click on a labor cell to toggle that labor. Right-click to move the cursor onto that cell instead of toggling it.
  • Left-click on a unit’s name, profession or squad to view its properties.
  • Right-click on a unit’s name, profession or squad to zoom to it.

Pressing Esc normally returns to the unit screen, but ShiftEsc would exit directly to the main dwarf mode screen.

nopause

Disables pausing (both manual and automatic) with the exception of pause forced by reveal hell. This is nice for digging under rivers.

embark-tools

A collection of embark-related tools. Usage and available tools:

embark-tools enable/disable tool [tool]...
anywhere:Allows embarking anywhere (including sites, mountain-only biomes, and oceans). Use with caution.
mouse:Implements mouse controls (currently in the local embark region only)
sand:Displays an indicator when sand is present in the currently-selected area, similar to the default clay/stone indicators.
sticky:Maintains the selected local area while navigating the world map

automaterial

This makes building constructions (walls, floors, fortifications, etc) a little bit easier by saving you from having to trawl through long lists of materials each time you place one.

Firstly, it moves the last used material for a given construction type to the top of the list, if there are any left. So if you build a wall with chalk blocks, the next time you place a wall the chalk blocks will be at the top of the list, regardless of distance (it only does this in “grouped” mode, as individual item lists could be huge). This should mean you can place most constructions without having to search for your preferred material type.

../_images/automaterial-mat.png

Pressing a while highlighting any material will enable that material for “auto select” for this construction type. You can enable multiple materials as autoselect. Now the next time you place this type of construction, the plugin will automatically choose materials for you from the kinds you enabled. If there is enough to satisfy the whole placement, you won’t be prompted with the material screen - the construction will be placed and you will be back in the construction menu as if you did it manually.

When choosing the construction placement, you will see a couple of options:

../_images/automaterial-pos.png

Use a here to temporarily disable the material autoselection, e.g. if you need to go to the material selection screen so you can toggle some materials on or off.

The other option (auto type selection, off by default) can be toggled on with t. If you toggle this option on, instead of returning you to the main construction menu after selecting materials, it returns you back to this screen. If you use this along with several autoselect enabled materials, you should be able to place complex constructions more conveniently.

buildingplan

When active (via enable buildingplan), this plugin adds a planning mode for furniture placement. You can then place furniture and other buildings before the required materials are available, and the job will be unsuspended when the item is created.

Very useful when combined with workflow - you can set a constraint to always have one or two doors/beds/tables/chairs/etc available, and place as many as you like. The plugins then take over and fulfill the orders, with minimal space dedicated to stockpiles.

confirm

Implements several confirmation dialogs for potentially destructive actions (for example, seizing goods from traders or deleting hauling routes).

Usage:

enable confirm:Enable all confirmations; alias confirm enable all. Replace with disable to disable.
confirm help:List available confirmation dialogues.
confirm enable option1 [option2...]:
 Enable (or disable) specific confirmation dialogues.

follow

Makes the game view follow the currently highlighted unit after you exit from the current menu or cursor mode. Handy for watching dwarves running around. Deactivated by moving the view manually.

mousequery

Adds mouse controls to the DF interface, eg click-and-drag designations.

Options:

plugin:enable/disable the entire plugin
rbutton:enable/disable right mouse button
track:enable/disable moving cursor in build and designation mode
edge:enable/disable active edge scrolling (when on, will also enable tracking)
live:enable/disable query view when unpaused
delay:Set delay when edge scrolling in tracking mode. Omit amount to display current setting.

Usage:

mousequery [plugin] [rbutton] [track] [edge] [live] [enable|disable]

resume

Allows automatic resumption of suspended constructions, along with colored UI hints for construction status.

title-folder

Displays the DF folder name in the window title bar when enabled.

title-version

Displays the DFHack version on DF’s title screen when enabled.

trackstop

Adds a q menu for track stops, which is completely blank by default. This allows you to view and/or change the track stop’s friction and dump direction settings, using the keybindings from the track stop building interface.

sort-items

Sort the visible item list:

sort-items order [order...]

Sort the item list using the given sequence of comparisons. The < prefix for an order makes undefined values sort first. The > prefix reverses the sort order for defined values.

Item order examples:

description material wear type quality

The orderings are defined in hack/lua/plugins/sort/*.lua

sort-units

Sort the visible unit list:

sort-units order [order...]

Sort the unit list using the given sequence of comparisons. The < prefix for an order makes undefined values sort first. The > prefix reverses the sort order for defined values.

Unit order examples:

name age arrival squad squad_position profession

The orderings are defined in hack/lua/plugins/sort/*.lua

stocks

Replaces the DF stocks screen with an improved version.

stocksettings

Offers the following commands to save and load stockpile settings. See gui/stockpiles for an in-game interface.

copystock:Copies the parameters of the currently highlighted stockpile to the custom stockpile settings and switches to custom stockpile placement mode, effectively allowing you to copy/paste stockpiles easily.
savestock:Saves the currently highlighted stockpile’s settings to a file in your Dwarf Fortress folder. This file can be used to copy settings between game saves or players. eg: savestock food_settings.dfstock
loadstock:Loads a saved stockpile settings file and applies it to the currently selected stockpile. eg: loadstock food_settings.dfstock

To use savestock and loadstock, use the q command to highlight a stockpile. Then run savestock giving it a descriptive filename. Then, in a different (or the same!) gameworld, you can highlight any stockpile with q then execute the loadstock command passing it the name of that file. The settings will be applied to that stockpile.

Note that files are relative to the DF folder, so put your files there or in a subfolder for easy access. Filenames should not have spaces. Generated materials, divine metals, etc are not saved as they are different in every world.

rename

Allows renaming various things. Use gui/rename for an in-game interface.

Options:

rename squad <index> "name"
Rename squad by index to ‘name’.
rename hotkey <index> \"name\"
Rename hotkey by index. This allows assigning longer commands to the DF hotkeys.
rename unit "nickname"
Rename a unit/creature highlighted in the DF user interface.
rename unit-profession "custom profession"
Change proffession name of the highlighted unit/creature.
rename building "name"
Set a custom name for the selected building. The building must be one of stockpile, workshop, furnace, trap, siege engine or an activity zone.

rendermax

A collection of renderer replacing/enhancing filters. For better effect try changing the black color in palette to non totally black. See Bay12 forums thread 128487 for more info.

Options:

trippy:Randomizes the color of each tiles. Used for fun, or testing.
light:Enable lighting engine.
light reload:Reload the settings file.
light sun <x>|cycle:
 Set time to <x> (in hours) or set it to df time cycle.
occlusionON, occlusionOFF:
 Show debug occlusion info.
disable:Disable any filter that is enabled.

An image showing lava and dragon breath. Not pictured here: sunlight, shining items/plants, materials that color the light etc...

../_images/rendermax.png

Job and Fortress management

autolabor

Automatically manage dwarf labors to efficiently complete jobs. Autolabor tries to keep as many dwarves as possible busy but also tries to have dwarves specialize in specific skills.

The key is that, for almost all labors, once a dwarf begins a job it will finish that job even if the associated labor is removed. Autolabor therefore frequently checks which dwarf or dwarves should take new jobs for that labor, and sets labors accordingly. Labors with equiptment (mining, hunting, and woodcutting), which are abandoned if labors change mid-job, are handled slightly differently to minimise churn.

Warning

autolabor will override any manual changes you make to labors while it is enabled, including through other tools such as Dwarf Therapist

Simple usage:

enable autolabor:
 Enables the plugin with default settings. (Persistent per fortress)
disable autolabor:
 Disables the plugin.

Anything beyond this is optional - autolabor works well on the default settings.

By default, each labor is assigned to between 1 and 200 dwarves (2-200 for mining). By default 33% of the workforce become haulers, who handle all hauling jobs as well as cleaning, pulling levers, recovering wounded, removing constructions, and filling ponds. Other jobs are automatically assigned as described above. Each of these settings can be adjusted.

Jobs are rarely assigned to nobles with responsibilities for meeting diplomats or merchants, never to the chief medical dwarf, and less often to the bookeeper and manager.

Hunting is never assigned without a butchery, and fishing is never assigned without a fishery.

For each labor a preference order is calculated based on skill, biased against masters of other trades and excluding those who can’t do the job. The labor is then added to the best <minimum> dwarves for that labor. We assign at least the minimum number of dwarfs, in order of preference, and then assign additional dwarfs that meet any of these conditions:

  • The dwarf is idle and there are no idle dwarves assigned to this labor
  • The dwarf has non-zero skill associated with the labor
  • The labor is mining, hunting, or woodcutting and the dwarf currently has it enabled.

We stop assigning dwarfs when we reach the maximum allowed.

Advanced usage:

autolabor <labor> <minimum> [<maximum>]:
 Set number of dwarves assigned to a labor.
autolabor <labor> haulers:
 Set a labor to be handled by hauler dwarves.
autolabor <labor> disable:
 Turn off autolabor for a specific labor.
autolabor <labor> reset:
 Return a labor to the default handling.
autolabor reset-all:
 Return all labors to the default handling.
autolabor list:List current status of all labors.
autolabor status:
 Show basic status information.

See autolabor-artisans for a differently-tuned setup.

Examples:

autolabor MINE
Keep at least 5 dwarves with mining enabled.
autolabor CUT_GEM 1 1
Keep exactly 1 dwarf with gemcutting enabled.
autolabor COOK 1 1 3
Keep 1 dwarf with cooking enabled, selected only from the top 3.
autolabor FEED_WATER_CIVILIANS haulers
Have haulers feed and water wounded dwarves.
autolabor CUTWOOD disable
Turn off autolabor for wood cutting.

autohauler

Autohauler is an autolabor fork.

Rather than the all-of-the-above means of autolabor, autohauler will instead only manage hauling labors and leave skilled labors entirely to the user, who will probably use Dwarf Therapist to do so.

Idle dwarves will be assigned the hauling labors; everyone else (including those currently hauling) will have the hauling labors removed. This is to encourage every dwarf to do their assigned skilled labors whenever possible, but resort to hauling when those jobs are not available. This also implies that the user will have a very tight skill assignment, with most skilled labors only being assigned to just one dwarf, no dwarf having more than two active skilled labors, and almost every non-military dwarf having at least one skilled labor assigned.

Autohauler allows skills to be flagged as to prevent hauling labors from being assigned when the skill is present. By default this is the unused ALCHEMIST labor but can be changed by the user.

job

Command for general job query and manipulation.

Options:

no extra options
Print details of the current job. The job can be selected in a workshop, or the unit/jobs screen.
list
Print details of all jobs in the selected workshop.
item-material <item-idx> <material[:subtoken]>
Replace the exact material id in the job item.
item-type <item-idx> <type[:subtype]>
Replace the exact item type id in the job item.

job-material

Alter the material of the selected job. Similar to job item-material ...

Invoked as:

job-material <inorganic-token>

Intended to be used as a keybinding:

  • In q mode, when a job is highlighted within a workshop or furnace, changes the material of the job. Only inorganic materials can be used in this mode.
  • In b mode, during selection of building components positions the cursor over the first available choice with the matching material.

job-duplicate

In q mode, when a job is highlighted within a workshop or furnace building, calling job-duplicate instantly duplicates the job.

autogems

Creates a new Workshop Order setting, automatically cutting rough gems when enabled.

stockflow

Allows the fortress bookkeeper to queue jobs through the manager, based on space or items available in stockpiles.

Inspired by workflow.

Usage:

stockflow enable
Enable the plugin.
stockflow disable
Disable the plugin.
stockflow fast
Enable the plugin in fast mode.
stockflow list
List any work order settings for your stockpiles.
stockflow status
Display whether the plugin is enabled.

While enabled, the q menu of each stockpile will have two new options:

  • j: Select a job to order, from an interface like the manager’s screen.
  • J: Cycle between several options for how many such jobs to order.

Whenever the bookkeeper updates stockpile records, new work orders will be placed on the manager’s queue for each such selection, reduced by the number of identical orders already in the queue.

In fast mode, new work orders will be enqueued once per day, instead of waiting for the bookkeeper.

workflow

Manage control of repeat jobs. gui/workflow provides a simple front-end integrated in the game UI.

Usage:

workflow enable [option...], workflow disable [option...]

If no options are specified, enables or disables the plugin. Otherwise, enables or disables any of the following options:

  • drybuckets: Automatically empty abandoned water buckets.
  • auto-melt: Resume melt jobs when there are objects to melt.
workflow jobs
List workflow-controlled jobs (if in a workshop, filtered by it).
workflow list
List active constraints, and their job counts.
workflow list-commands
List active constraints as workflow commands that re-create them; this list can be copied to a file, and then reloaded using the script built-in command.
workflow count <constraint-spec> <cnt-limit> [cnt-gap]
Set a constraint, counting every stack as 1 item.
workflow amount <constraint-spec> <cnt-limit> [cnt-gap]
Set a constraint, counting all items within stacks.
workflow unlimit <constraint-spec>
Delete a constraint.
workflow unlimit-all
Delete all constraints.

Function

When the plugin is enabled, it protects all repeat jobs from removal. If they do disappear due to any cause, they are immediately re-added to their workshop and suspended.

In addition, when any constraints on item amounts are set, repeat jobs that produce that kind of item are automatically suspended and resumed as the item amount goes above or below the limit. The gap specifies how much below the limit the amount has to drop before jobs are resumed; this is intended to reduce the frequency of jobs being toggled.

Constraint format

The constraint spec consists of 4 parts, separated with / characters:

ITEM[:SUBTYPE]/[GENERIC_MAT,...]/[SPECIFIC_MAT:...]/[LOCAL,<quality>]

The first part is mandatory and specifies the item type and subtype, using the raw tokens for items (the same syntax used custom reaction inputs). For more information, see this wiki page.

The subsequent parts are optional:

  • A generic material spec constrains the item material to one of the hard-coded generic classes, which currently include:

    PLANT WOOD CLOTH SILK LEATHER BONE SHELL SOAP TOOTH HORN PEARL YARN
    METAL STONE SAND GLASS CLAY MILK
    
  • A specific material spec chooses the material exactly, using the raw syntax for reaction input materials, e.g. INORGANIC:IRON, although for convenience it also allows just IRON, or ACACIA:WOOD etc. See the link above for more details on the unabbreviated raw syntax.

  • A comma-separated list of miscellaneous flags, which currently can be used to ignore imported items or items below a certain quality.

Constraint examples

Keep metal bolts within 900-1000, and wood/bone within 150-200:

workflow amount AMMO:ITEM_AMMO_BOLTS/METAL 1000 100
workflow amount AMMO:ITEM_AMMO_BOLTS/WOOD,BONE 200 50

Keep the number of prepared food & drink stacks between 90 and 120:

workflow count FOOD 120 30
workflow count DRINK 120 30

Make sure there are always 25-30 empty bins/barrels/bags:

workflow count BIN 30
workflow count BARREL 30
workflow count BOX/CLOTH,SILK,YARN 30

Make sure there are always 15-20 coal and 25-30 copper bars:

workflow count BAR//COAL 20
workflow count BAR//COPPER 30

Produce 15-20 gold crafts:

workflow count CRAFTS//GOLD 20

Collect 15-20 sand bags and clay boulders:

workflow count POWDER_MISC/SAND 20
workflow count BOULDER/CLAY 20

Make sure there are always 80-100 units of dimple dye:

workflow amount POWDER_MISC//MUSHROOM_CUP_DIMPLE:MILL 100 20

Note

In order for this to work, you have to set the material of the PLANT input on the Mill Plants job to MUSHROOM_CUP_DIMPLE using the job item-material command. Otherwise the plugin won’t be able to deduce the output material.

Maintain 10-100 locally-made crafts of exceptional quality:

workflow count CRAFTS///LOCAL,EXCEPTIONAL 100 90

fix-job-postings

This command fixes crashes caused by previous versions of workflow, mostly in DFHack 0.40.24-r4, and should be run automatically when loading a world (but can also be run manually if desired).

clean

Cleans all the splatter that get scattered all over the map, items and creatures. In an old fortress, this can significantly reduce FPS lag. It can also spoil your !!FUN!!, so think before you use it.

Options:

map:Clean the map tiles. By default, it leaves mud and snow alone.
units:Clean the creatures. Will also clean hostiles.
items:Clean all the items. Even a poisoned blade.

Extra options for map:

mud:Remove mud in addition to the normal stuff.
snow:Also remove snow coverings.

spotclean

Works like clean map snow mud, but only for the tile under the cursor. Ideal if you want to keep that bloody entrance clean map would clean up.

autodump

This plugin adds an option to the q menu for stckpiles when enabled. When autodump is enabled for a stockpile, any items placed in the stockpile will automatically be designated to be dumped.

Alternatively, you can use it to quickly move all items designated to be dumped. Items are instantly moved to the cursor position, the dump flag is unset, and the forbid flag is set, as if it had been dumped normally. Be aware that any active dump item tasks still point at the item.

Cursor must be placed on a floor tile so the items can be dumped there.

Options:

destroy:Destroy instead of dumping. Doesn’t require a cursor. If called again before the game is resumed, cancels destroy.
destroy-here:As destroy, but only the selected item in the k list, or inside a container. Alias autodump-destroy-here, for keybindings.
visible:Only process items that are not hidden.
hidden:Only process hidden items.
forbidden:Only process forbidden items (default: only unforbidden).

cleanowned

Confiscates items owned by dwarfs. By default, owned food on the floor and rotten items are confistacted and dumped.

Options:

all:confiscate all owned items
scattered:confiscated and dump all items scattered on the floor
x:confiscate/dump items with wear level ‘x’ and more
X:confiscate/dump items with wear level ‘X’ and more
dryrun:a dry run. combine with other options to see what will happen without it actually happening.

Example:

cleanowned scattered X
This will confiscate rotten and dropped food, garbage on the floors and any worn items with ‘X’ damage and above.

dwarfmonitor

Records dwarf activity to measure fort efficiency.

Options:

enable <mode>:Start monitoring mode. mode can be “work”, “misery”, “weather”, or “all”. This will enable all corresponding widgets, if applicable.
disable <mode>:Stop monitoring mode, and disable corresponding widgets, if applicable.
stats:Show statistics summary
prefs:Show dwarf preferences summary
reload:Reload configuration file (dfhack-config/dwarfmonitor.json)

Widget configuration:

The following types of widgets (defined in hack/lua/plugins/dwarfmonitor.lua) can be displayed on the main fortress mode screen:

date:Show the in-game date
misery:Show overall happiness levels of all dwarves
weather:Show current weather (rain/snow)
cursor:Show the current mouse cursor position

The file dfhack-config/dwarfmonitor.json can be edited to control the positions and settings of all widgets displayed. This file should contain a JSON object with the key widgets containing an array of objects - see the included file in the dfhack-config folder for an example:

{
    "widgets": [
        {
            "type": "widget type (weather, misery, etc.)",
            "x": X coordinate,
            "y": Y coordinate
            <...additional options...>
        }
    ]
}

X and Y coordinates begin at zero (in the upper left corner of the screen). Negative coordinates will be treated as distances from the lower right corner, beginning at 1 - e.g. an x coordinate of 0 is the leftmost column, while an x coordinate of 1 is the rightmost column.

By default, the x and y coordinates given correspond to the leftmost tile of the widget. Including an anchor option set to right will cause the rightmost tile of the widget to be located at this position instead.

Some widgets support additional options:

  • date widget:

    • format: specifies the format of the date. The following characters are replaced (all others, such as punctuation, are not modified)

      • Y or y: The current year
      • M: The current month, zero-padded if necessary
      • m: The current month, not zero-padded
      • D: The current day, zero-padded if necessary
      • d: The current day, not zero-padded

      The default date format is Y-M-D, per the ISO8601 standard.

  • cursor widget:

    • format: Specifies the format. X, x, Y, and y are replaced with the corresponding cursor cordinates, while all other characters are unmodified.
    • show_invalid: If set to true, the mouse coordinates will both be displayed as -1 when the cursor is outside of the DF window; otherwise, nothing will be displayed.

dwarfvet

Enables Animal Caretaker functionality

Always annoyed your dragons become useless after a minor injury? Well, with dwarfvet, your animals become first rate members of your fort. It can also be used to train medical skills.

Animals need to be treated in an animal hospital, which is simply a hospital that is also an animal training zone. The console will print out a list on game load, and whenever one is added or removed. Dwarfs must have the Animal Caretaker labor to treat animals. Normal medical skills are used (and no experience is given to the Animal Caretaker skill).

Options:

enable:Enables Animal Caretakers to treat and manage animals
disable:Turns off the plguin
report:Reports all zones that the game considers animal hospitals

workNow

Force all dwarves to look for a job immediately, or as soon as the game is unpaused.

seedwatch

Watches the numbers of seeds available and enables/disables seed and plant cooking.

Each plant type can be assigned a limit. If their number falls below that limit, the plants and seeds of that type will be excluded from cookery. If the number rises above the limit + 20, then cooking will be allowed.

The plugin needs a fortress to be loaded and will deactivate automatically otherwise. You have to reactivate with ‘seedwatch start’ after you load the game.

Options:

all:Adds all plants from the abbreviation list to the watch list.
start:Start watching.
stop:Stop watching.
info:Display whether seedwatch is watching, and the watch list.
clear:Clears the watch list.

Examples:

seedwatch MUSHROOM_HELMET_PLUMP 30
add MUSHROOM_HELMET_PLUMP to the watch list, limit = 30
seedwatch MUSHROOM_HELMET_PLUMP
removes MUSHROOM_HELMET_PLUMP from the watch list.
seedwatch all 30
adds all plants from the abbreviation list to the watch list, the limit being 30.

zone

Helps a bit with managing activity zones (pens, pastures and pits) and cages.

Options:

set:Set zone or cage under cursor as default for future assigns.
assign:Assign unit(s) to the pen or pit marked with the ‘set’ command. If no filters are set a unit must be selected in the in-game ui. Can also be followed by a valid zone id which will be set instead.
unassign:Unassign selected creature from it’s zone.
nick:Mass-assign nicknames, must be followed by the name you want to set.
remnick:Mass-remove nicknames.
tocages:Assign unit(s) to cages inside a pasture.
uinfo:Print info about unit(s). If no filters are set a unit must be selected in the in-game ui.
zinfo:Print info about zone(s). If no filters are set zones under the cursor are listed.
verbose:Print some more info.
filters:Print list of valid filter options.
examples:Print some usage examples.
not:Negates the next filter keyword.

Filters:

all:Process all units (to be used with additional filters).
count:Must be followed by a number. Process only n units (to be used with additional filters).
unassigned:Not assigned to zone, chain or built cage.
minage:Minimum age. Must be followed by number.
maxage:Maximum age. Must be followed by number.
race:Must be followed by a race RAW ID (e.g. BIRD_TURKEY, ALPACA, etc). Negatable.
caged:In a built cage. Negatable.
own:From own civilization. Negatable.
merchant:Is a merchant / belongs to a merchant. Should only be used for pitting, not for stealing animals (slaughter should work).
war:Trained war creature. Negatable.
hunting:Trained hunting creature. Negatable.
tamed:Creature is tame. Negatable.
trained:Creature is trained. Finds war/hunting creatures as well as creatures who have a training level greater than ‘domesticated’. If you want to specifically search for war/hunting creatures use ‘war’ or ‘hunting’ Negatable.
trainablewar:Creature can be trained for war (and is not already trained for war/hunt). Negatable.
trainablehunt:Creature can be trained for hunting (and is not already trained for war/hunt). Negatable.
male:Creature is male. Negatable.
female:Creature is female. Negatable.
egglayer:Race lays eggs. Negatable.
grazer:Race is a grazer. Negatable.
milkable:Race is milkable. Negatable.

Usage with single units

One convenient way to use the zone tool is to bind the command ‘zone assign’ to a hotkey, maybe also the command ‘zone set’. Place the in-game cursor over a pen/pasture or pit, use ‘zone set’ to mark it. Then you can select units on the map (in ‘v’ or ‘k’ mode), in the unit list or from inside cages and use ‘zone assign’ to assign them to their new home. Allows pitting your own dwarves, by the way.

Usage with filters

All filters can be used together with the ‘assign’ command.

Restrictions: It’s not possible to assign units who are inside built cages or chained because in most cases that won’t be desirable anyways. It’s not possible to cage owned pets because in that case the owner uncages them after a while which results in infinite hauling back and forth.

Usually you should always use the filter ‘own’ (which implies tame) unless you want to use the zone tool for pitting hostiles. ‘own’ ignores own dwarves unless you specify ‘race DWARF’ (so it’s safe to use ‘assign all own’ to one big pasture if you want to have all your animals at the same place). ‘egglayer’ and ‘milkable’ should be used together with ‘female’ unless you have a mod with egg-laying male elves who give milk or whatever. Merchants and their animals are ignored unless you specify ‘merchant’ (pitting them should be no problem, but stealing and pasturing their animals is not a good idea since currently they are not properly added to your own stocks; slaughtering them should work).

Most filters can be negated (e.g. ‘not grazer’ -> race is not a grazer).

Mass-renaming

Using the ‘nick’ command you can set the same nickname for multiple units. If used without ‘assign’, ‘all’ or ‘count’ it will rename all units in the current default target zone. Combined with ‘assign’, ‘all’ or ‘count’ (and further optional filters) it will rename units matching the filter conditions.

Cage zones

Using the ‘tocages’ command you can assign units to a set of cages, for example a room next to your butcher shop(s). They will be spread evenly among available cages to optimize hauling to and butchering from them. For this to work you need to build cages and then place one pen/pasture activity zone above them, covering all cages you want to use. Then use ‘zone set’ (like with ‘assign’) and use ‘zone tocages filter1 filter2 ...’. ‘tocages’ overwrites ‘assign’ because it would make no sense, but can be used together with ‘nick’ or ‘remnick’ and all the usual filters.

Examples

zone assign all own ALPACA minage 3 maxage 10
Assign all own alpacas who are between 3 and 10 years old to the selected pasture.
zone assign all own caged grazer nick ineedgrass
Assign all own grazers who are sitting in cages on stockpiles (e.g. after buying them from merchants) to the selected pasture and give them the nickname ‘ineedgrass’.
zone assign all own not grazer not race CAT
Assign all own animals who are not grazers, excluding cats.
zone assign count 5 own female milkable
Assign up to 5 own female milkable creatures to the selected pasture.
zone assign all own race DWARF maxage 2
Throw all useless kids into a pit :)
zone nick donttouchme
Nicknames all units in the current default zone or cage to ‘donttouchme’. Mostly intended to be used for special pastures or cages which are not marked as rooms you want to protect from autobutcher.
zone tocages count 50 own tame male not grazer
Stuff up to 50 owned tame male animals who are not grazers into cages built on the current default zone.

autonestbox

Assigns unpastured female egg-layers to nestbox zones. Requires that you create pen/pasture zones above nestboxes. If the pen is bigger than 1x1 the nestbox must be in the top left corner. Only 1 unit will be assigned per pen, regardless of the size. The age of the units is currently not checked, most birds grow up quite fast. Egglayers who are also grazers will be ignored, since confining them to a 1x1 pasture is not a good idea. Only tame and domesticated own units are processed since pasturing half-trained wild egglayers could destroy your neat nestbox zones when they revert to wild. When called without options autonestbox will instantly run once.

Options:

start:Start running every X frames (df simulation ticks). Default: X=6000, which would be every 60 seconds at 100fps.
stop:Stop running automatically.
sleep:Must be followed by number X. Changes the timer to sleep X frames between runs.

autobutcher

Assigns lifestock for slaughter once it reaches a specific count. Requires that you add the target race(s) to a watch list. Only tame units will be processed.

Units will be ignored if they are:

  • Nicknamed (for custom protection; you can use the rename unit tool individually, or zone nick for groups)
  • Caged, if and only if the cage is defined as a room (to protect zoos)
  • Trained for war or hunting

Creatures who will not reproduce (because they’re not interested in the opposite sex or have been gelded) will be butchered before those who will. Older adults and younger children will be butchered first if the population is above the target (default 1 male, 5 female kids and adults). Note that you may need to set a target above 1 to have a reliable breeding population due to asexuality etc. See fix-ster if this is a problem.

Options:

example:Print some usage examples.
start:Start running every X frames (df simulation ticks). Default: X=6000, which would be every 60 seconds at 100fps.
stop:Stop running automatically.
sleep <x>:Changes the timer to sleep X frames between runs.
watch R:Start watching a race. R can be a valid race RAW id (ALPACA, BIRD_TURKEY, etc) or a list of ids seperated by spaces or the keyword ‘all’ which affects all races on your current watchlist.
unwatch R:Stop watching race(s). The current target settings will be remembered. R can be a list of ids or the keyword ‘all’.
forget R:Stop watching race(s) and forget it’s/their target settings. R can be a list of ids or the keyword ‘all’.
autowatch:Automatically adds all new races (animals you buy from merchants, tame yourself or get from migrants) to the watch list using default target count.
noautowatch:Stop auto-adding new races to the watchlist.
list:Print the current status and watchlist.
list_export:Print the commands needed to set up status and watchlist, which can be used to import them to another save (see notes).
target <fk> <mk> <fa> <ma> <R>:
 Set target count for specified race(s). The first four arguments are the number of female and male kids, and female and male adults. R can be a list of spceies ids, or the keyword all or new. R = 'all': change target count for all races on watchlist and set the new default for the future. R = 'new': don’t touch current settings on the watchlist, only set the new default for future entries.
list_export:Print the commands required to rebuild your current settings.

Note

Settings and watchlist are stored in the savegame, so that you can have different settings for each save. If you want to copy your watchlist to another savegame you must export the commands required to recreate your settings.

To export, open an external terminal in the DF directory, and run dfhack-run autobutcher list_export > filename.txt. To import, load your new save and run script filename.txt in the DFHack terminal.

Examples:

You want to keep max 7 kids (4 female, 3 male) and max 3 adults (2 female, 1 male) of the race alpaca. Once the kids grow up the oldest adults will get slaughtered. Excess kids will get slaughtered starting with the youngest to allow that the older ones grow into adults. Any unnamed cats will be slaughtered as soon as possible.

autobutcher target 4 3 2 1 ALPACA BIRD_TURKEY
autobutcher target 0 0 0 0 CAT
autobutcher watch ALPACA BIRD_TURKEY CAT
autobutcher start

Automatically put all new races onto the watchlist and mark unnamed tame units for slaughter as soon as they arrive in your fort. Settings already made for specific races will be left untouched.

autobutcher target 0 0 0 0 new
autobutcher autowatch
autobutcher start

Stop watching the races alpaca and cat, but remember the target count settings so that you can use ‘unwatch’ without the need to enter the values again. Note: ‘autobutcher unwatch all’ works, but only makes sense if you want to keep the plugin running with the ‘autowatch’ feature or manually add some new races with ‘watch’. If you simply want to stop it completely use ‘autobutcher stop’ instead.

autobutcher unwatch ALPACA CAT

autochop

Automatically manage tree cutting designation to keep available logs withing given quotas.

Open the dashboard by running:

getplants autochop

The plugin must be activated (with c) before it can be used. You can then set logging quotas and restrict designations to specific burrows (with ‘Enter’) if desired. The plugin’s activity cycle runs once every in game day.

If you add enable getplants to your dfhack.init there will be a hotkey to open the dashboard from the chop designation menu.

Map modification

3dveins

Removes all existing veins from the map and generates new ones using 3D Perlin noise, in order to produce a layout that smoothly flows between Z levels. The vein distribution is based on the world seed, so running the command for the second time should produce no change. It is best to run it just once immediately after embark.

This command is intended as only a cosmetic change, so it takes care to exactly preserve the mineral counts reported by prospect all. The amounts of different layer stones may slightly change in some cases if vein mass shifts between Z layers.

The only undo option is to restore your save from backup.

alltraffic

Set traffic designations for every single tile of the map - useful for resetting traffic designations. See also filltraffic, restrictice, and restrictliquids.

Options:

H:High Traffic
N:Normal Traffic
L:Low Traffic
R:Restricted Traffic

burrow

Miscellaneous burrow control. Allows manipulating burrows and automated burrow expansion while digging.

Options:

enable feature ...:
 

Enable features of the plugin.

disable feature ...:
 

Disable features of the plugin.

clear-unit burrow burrow ...:
 

Remove all units from the burrows.

clear-tiles burrow burrow ...:
 

Remove all tiles from the burrows.

set-units target-burrow src-burrow ...:
 

Clear target, and adds units from source burrows.

add-units target-burrow src-burrow ...:
 

Add units from the source burrows to the target.

remove-units target-burrow src-burrow ...:
 

Remove units in source burrows from the target.

set-tiles target-burrow src-burrow ...:
 

Clear target and adds tiles from the source burrows.

add-tiles target-burrow src-burrow ...:
 

Add tiles from the source burrows to the target.

remove-tiles target-burrow src-burrow ...:
 

Remove tiles in source burrows from the target.

For these three options, in place of a source burrow it is possible to use one of the following keywords: ABOVE_GROUND, SUBTERRANEAN, INSIDE, OUTSIDE, LIGHT, DARK, HIDDEN, REVEALED

Features:

auto-grow:When a wall inside a burrow with a name ending in ‘+’ is dug out, the burrow is extended to newly-revealed adjacent walls. This final ‘+’ may be omitted in burrow name args of commands above. Digging 1-wide corridors with the miner inside the burrow is SLOW.

changelayer

Changes material of the geology layer under cursor to the specified inorganic RAW material. Can have impact on all surrounding regions, not only your embark! By default changing stone to soil and vice versa is not allowed. By default changes only the layer at the cursor position. Note that one layer can stretch across lots of z levels. By default changes only the geology which is linked to the biome under the cursor. That geology might be linked to other biomes as well, though. Mineral veins and gem clusters will stay on the map. Use changevein for them.

tl;dr: You will end up with changing quite big areas in one go, especially if you use it in lower z levels. Use with care.

Options:

all_biomes:Change selected layer for all biomes on your map. Result may be undesirable since the same layer can AND WILL be on different z-levels for different biomes. Use the tool ‘probe’ to get an idea how layers and biomes are distributed on your map.
all_layers:Change all layers on your map (only for the selected biome unless ‘all_biomes’ is added). Candy mountain, anyone? Will make your map quite boring, but tidy.
force:Allow changing stone to soil and vice versa. !!THIS CAN HAVE WEIRD EFFECTS, USE WITH CARE!! Note that soil will not be magically replaced with stone. You will, however, get a stone floor after digging so it will allow the floor to be engraved. Note that stone will not be magically replaced with soil. You will, however, get a soil floor after digging so it could be helpful for creating farm plots on maps with no soil.
verbose:Give some details about what is being changed.
trouble:Give some advice about known problems.

Examples:

changelayer GRANITE
Convert layer at cursor position into granite.
changelayer SILTY_CLAY force
Convert layer at cursor position into clay even if it’s stone.
changelayer MARBLE all_biomes all_layers
Convert all layers of all biomes which are not soil into marble.

Note

  • If you use changelayer and nothing happens, try to pause/unpause the game for a while and try to move the cursor to another tile. Then try again. If that doesn’t help try temporarily changing some other layer, undo your changes and try again for the layer you want to change. Saving and reloading your map might also help.
  • You should be fine if you only change single layers without the use of ‘force’. Still it’s advisable to save your game before messing with the map.
  • When you force changelayer to convert soil to stone you might experience weird stuff (flashing tiles, tiles changed all over place etc). Try reverting the changes manually or even better use an older savegame. You did save your game, right?

changevein

Changes material of the vein under cursor to the specified inorganic RAW material. Only affects tiles within the current 16x16 block - for veins and large clusters, you will need to use this command multiple times.

Example:

changevein NATIVE_PLATINUM
Convert vein at cursor position into platinum ore.

changeitem

Allows changing item material and base quality. By default the item currently selected in the UI will be changed (you can select items in the ‘k’ list or inside containers/inventory). By default change is only allowed if materials is of the same subtype (for example wood<->wood, stone<->stone etc). But since some transformations work pretty well and may be desired you can override this with ‘force’. Note that some attributes will not be touched, possibly resulting in weirdness. To get an idea how the RAW id should look like, check some items with ‘info’. Using ‘force’ might create items which are not touched by crafters/haulers.

Options:

info:Don’t change anything, print some info instead.
here:Change all items at the cursor position. Requires in-game cursor.
material, m:Change material. Must be followed by valid material RAW id.
quality, q:Change base quality. Must be followed by number (0-5).
force:Ignore subtypes, force change to new material.

Examples:

changeitem m INORGANIC:GRANITE here
Change material of all items under the cursor to granite.
changeitem q 5
Change currently selected item to masterpiece quality.

cleanconst

Cleans up construction materials.

This utility alters all constructions on the map so that they spawn their building component when they are disassembled, allowing their actual build items to be safely deleted. This can improve FPS in extreme situations.

deramp

Removes all ramps designated for removal from the map. This is useful for replicating the old channel digging designation. It also removes any and all ‘down ramps’ that can remain after a cave-in (you don’t have to designate anything for that to happen).

dig

This plugin makes many automated or complicated dig patterns easy.

Basic commands:

digv:Designate all of the selected vein for digging.
digvx:Also cross z-levels, digging stairs as needed. Alias for digv x.
digl:Like digv, for layer stone. Also supports an undo option to remove designations, for if you accidentally set 50 levels at once.
diglx:Also cross z-levels, digging stairs as needed. Alias for digl x.

digexp

This command is for exploratory mining.

There are two variables that can be set: pattern and filter.

Patterns:

diag5:diagonals separated by 5 tiles
diag5r:diag5 rotated 90 degrees
ladder:A ‘ladder’ pattern
ladderr:ladder rotated 90 degrees
clear:Just remove all dig designations
cross:A cross, exactly in the middle of the map.

Filters:

all:designate whole z-level
hidden:designate only hidden tiles of z-level (default)
designated:Take current designation and apply pattern to it.

After you have a pattern set, you can use expdig to apply it again.

Examples:

expdig diag5 hidden
Designate the diagonal 5 patter over all hidden tiles
expdig
Apply last used pattern and filter
expdig ladder designated
Take current designations and replace them with the ladder pattern

digcircle

A command for easy designation of filled and hollow circles. It has several types of options.

Shape:

hollow:Set the circle to hollow (default)
filled:Set the circle to filled
#:Diameter in tiles (default = 0, does nothing)

Action:

set:Set designation (default)
unset:Unset current designation
invert:Invert designations already present

Designation types:

dig:Normal digging designation (default)
ramp:Ramp digging
ustair:Staircase up
dstair:Staircase down
xstair:Staircase up/down
chan:Dig channel

After you have set the options, the command called with no options repeats with the last selected parameters.

Examples:

digcircle filled 3
Dig a filled circle with diameter = 3.
digcircle
Do it again.

digtype

For every tile on the map of the same vein type as the selected tile, this command designates it to have the same designation as the selected tile. If the selected tile has no designation, they will be dig designated. If an argument is given, the designation of the selected tile is ignored, and all appropriate tiles are set to the specified designation.

Options:

dig:
channel:
ramp:
updown:up/down stairs
up:up stairs
down:down stairs
clear:clear designation

digFlood

Automatically digs out specified veins as they are discovered. It runs once every time a dwarf finishes a dig job. It will only dig out appropriate tiles that are adjacent to the finished dig job. To add a vein type, use digFlood 1 [type]. This will also enable the plugin. To remove a vein type, use digFlood 0 [type] 1 to disable, then remove, then re-enable.

Usage:

help digflood:detailed help message
digFlood 0:disable the plugin
digFlood 1:enable the plugin
digFlood 0 MICROCLINE COAL_BITUMINOUS 1:
 disable plugin, remove microcline and bituminous coal from monitoring, then re-enable the plugin
digFlood CLEAR:remove all inorganics from monitoring
digFlood digAll1:
 ignore the monitor list and dig any vein
digFlood digAll0:
 disable digAll mode

filltraffic

Set traffic designations using flood-fill starting at the cursor. See also alltraffic, restrictice, and restrictliquids. Options:

H:High Traffic
N:Normal Traffic
L:Low Traffic
R:Restricted Traffic
X:Fill across z-levels.
B:Include buildings and stockpiles.
P:Include empty space.

Example:

filltraffic H
When used in a room with doors, it will set traffic to HIGH in just that room.

fortplan

Usage: fortplan [filename]

Designates furniture for building according to a .csv file with quickfort-style syntax. Companion to digfort.

The first line of the file must contain the following:

#build start(X; Y; <start location description>)

...where X and Y are the offset from the top-left corner of the file’s area where the in-game cursor should be located, and <start location description> is an optional description of where that is. You may also leave a description of the contents of the file itself following the closing parenthesis on the same line.

The syntax of the file itself is similar to digfort or quickfort. At present, only buildings constructed of an item with the same name as the building are supported. All other characters are ignored. For example:

`,`,d,`,`
`,f,`,t,`
`,s,b,c,`

This section of a file would designate for construction a door and some furniture inside a bedroom: specifically, clockwise from top left, a cabinet, a table, a chair, a bed, and a statue.

All of the building designation uses buildingplan, so you do not need to have the items available to construct all the buildings when you run fortplan with the .csv file.

getplants

This tool allows plant gathering and tree cutting by RAW ID. Specify the types of trees to cut down and/or shrubs to gather by their plant names, separated by spaces.

Options:

-t:Select trees only (exclude shrubs)
-s:Select shrubs only (exclude trees)
-c:Clear designations instead of setting them
-x:Apply selected action to all plants except those specified (invert selection)
-a:Select every type of plant (obeys -t/-s)

Specifying both -t and -s will have no effect. If no plant IDs are specified, all valid plant IDs will be listed.

infiniteSky

Automatically allocates new z-levels of sky at the top of the map as you build up, or on request allocates many levels all at once.

Usage:

infiniteSky n
Raise the sky by n z-levels.
infiniteSky enable/disable
Enables/disables monitoring of constructions. If you build anything in the second to highest z-level, it will allocate one more sky level. This is so you can continue to build stairs upward.

Sometimes new z-levels disappear and cause cave-ins. Saving and loading after creating new z-levels should fix the problem.

liquids

Allows adding magma, water and obsidian to the game. It replaces the normal dfhack command line and can’t be used from a hotkey. Settings will be remembered as long as dfhack runs. Intended for use in combination with the command liquids-here (which can be bound to a hotkey). See also Issue 80.

Note

Spawning and deleting liquids can mess up pathing data and temperatures (creating heat traps). You’ve been warned.

Settings will be remembered until you quit DF. You can call liquids-here to execute the last configured action, which is useful in combination with keybindings.

Usage: point the DF cursor at a tile you want to modify and use the commands.

If you only want to add or remove water or magma from one tile, source may be easier to use.

Commands

Misc commands:

q:quit
help, ?:print this list of commands
<empty line>:put liquid

Modes:

m:switch to magma
w:switch to water
o:make obsidian wall instead
of:make obsidian floors
rs:make a river source
f:flow bits only
wclean:remove salt and stagnant flags from tiles

Set-Modes and flow properties (only for magma/water):

s+:only add mode
s.:set mode
s-:only remove mode
f+:make the spawned liquid flow
f.:don’t change flow state (read state in flow mode)
f-:make the spawned liquid static

Permaflow (only for water):

pf.:don’t change permaflow state
pf-:make the spawned liquid static
pf[NS][EW]:make the spawned liquid permanently flow
0-7:set liquid amount

Brush size and shape:

p, point:Single tile
r, range:Block with cursor at bottom north-west (any place, any size)
block:DF map block with cursor in it (regular spaced 16x16x1 blocks)
column:Column from cursor, up through free space
flood:Flood-fill water tiles from cursor (only makes sense with wclean)

liquids-here

Run the liquid spawner with the current/last settings made in liquids (if no settings in liquids were made it paints a point of 7/7 magma by default).

Intended to be used as keybinding. Requires an active in-game cursor.

plant

A tool for creating shrubs, growing, or getting rid of them.

Subcommands:

create:Creates a new sapling under the cursor. Takes a raw ID as argument (e.g. TOWER_CAP). The cursor must be located on a dirt or grass floor tile.
grow:Turns saplings into trees; under the cursor if a sapling is selected, or every sapling on the map if the cursor is hidden.
extirpate:Kills the tree or shrub under the cursor, instantly turning them to ashes.
immolate:Sets the plants on fire instead. The fires can and will spread ;)

For mass effects, use one of the additional options:

shrubs:affect all shrubs on the map
trees:affect all trees on the map
all:affect every plant!

regrass

Regrows all the grass. Not much to it ;)

restrictice

Restrict traffic on all tiles on top of visible ice. See also alltraffic, filltraffic, and restrictliquids.

restrictliquids

Restrict traffic on all visible tiles with liquid. See also alltraffic, filltraffic, and restrictice.

tiletypes

Can be used for painting map tiles and is an interactive command, much like liquids. If something goes wrong, fixveins may help.

The tool works with two set of options and a brush. The brush determines which tiles will be processed. First set of options is the filter, which can exclude some of the tiles from the brush by looking at the tile properties. The second set of options is the paint - this determines how the selected tiles are changed.

Both paint and filter can have many different properties including things like general shape (WALL, FLOOR, etc.), general material (SOIL, STONE, MINERAL, etc.), state of ‘designated’, ‘hidden’ and ‘light’ flags.

The properties of filter and paint can be partially defined. This means that you can for example turn all stone fortifications into floors, preserving the material:

filter material STONE
filter shape FORTIFICATION
paint shape FLOOR

Or turn mineral vein floors back into walls:

filter shape FLOOR
filter material MINERAL
paint shape WALL

The tool also allows tweaking some tile flags:

paint hidden 1
paint hidden 0

This will hide previously revealed tiles (or show hidden with the 0 option).

More recently, the tool supports changing the base material of the tile to an arbitrary stone from the raws, by creating new veins as required. Note that this mode paints under ice and constructions, instead of overwriting them. To enable, use:

paint stone MICROCLINE

This mode is incompatible with the regular material setting, so changing it cancels the specific stone selection:

paint material ANY

Since different vein types have different drop rates, it is possible to choose which one to use in painting:

paint veintype CLUSTER_SMALL

When the chosen type is CLUSTER (the default), the tool may automatically choose to use layer stone or lava stone instead of veins if its material matches the desired one.

Any paint or filter option (or the entire paint or filter) can be disabled entirely by using the ANY keyword:

paint hidden ANY
paint shape ANY
filter material any
filter shape any
filter any

You can use several different brushes for painting tiles:

point:a single tile
range:a rectangular range
column:a column ranging from current cursor to the first solid tile above
block:a DF map block - 16x16 tiles, in a regular grid

Example:

range 10 10 1

This will change the brush to a rectangle spanning 10x10 tiles on one z-level. The range starts at the position of the cursor and goes to the east, south and up.

For more details, use tiletypes help.

tiletypes-command

Runs tiletypes commands, separated by ;. This makes it possible to change tiletypes modes from a hotkey or via dfhack-run.

tiletypes-here

Apply the current tiletypes options at the in-game cursor position, including the brush. Can be used from a hotkey.

tiletypes-here-point

Apply the current tiletypes options at the in-game cursor position to a single tile. Can be used from a hotkey.

tubefill

Fills all the adamantine veins again. Veins that were hollow will be left alone.

Options:

hollow:fill in naturally hollow veins too

Beware that filling in hollow veins will trigger a demon invasion on top of your miner when you dig into the region that used to be hollow.

Mods and Cheating

add-spatter

This plugin makes reactions with names starting with SPATTER_ADD_ produce contaminants on the items instead of improvements. The plugin is intended to give some use to all those poisons that can be bought from caravans, so they’re immune to being washed away by water or destroyed by clean.

adv-bodyswap

This allows taking control over your followers and other creatures in adventure mode. For example, you can make them pick up new arms and armor and equip them properly.

Usage:

  • When viewing unit details, body-swaps into that unit.
  • In the main adventure mode screen, reverts transient swap.

createitem

Allows creating new items of arbitrary types and made of arbitrary materials. By default, items created are spawned at the feet of the selected unit.

Specify the item and material information as you would indicate them in custom reaction raws, with the following differences:

  • Separate the item and material with a space rather than a colon
  • If the item has no subtype, omit the :NONE
  • If the item is REMAINS, FISH, FISH_RAW, VERMIN, PET, or EGG, specify a CREATURE:CASTE pair instead of a material token.

Corpses, body parts, and prepared meals cannot be created using this tool.

Examples:

createitem GLOVES:ITEM_GLOVES_GAUNTLETS INORGANIC:STEEL 2
        Create 2 pairs of steel gauntlets.
createitem WOOD PLANT_MAT:TOWER_CAP:WOOD
        Create tower-cap logs.

For more examples, see this wiki page.

To change where new items are placed, first run the command with a destination type while an appropriate destination is selected.

Options:

floor:Subsequent items will be placed on the floor beneath the selected unit’s feet.
item:Subsequent items will be stored inside the currently selected item.
building:Subsequent items will become part of the currently selected building. Good for loading traps; do not use with workshops (or deconstruct to use the item).

diggingInvaders

Makes invaders dig or destroy constructions to get to your dwarves.

To enable/disable the pluging, use: diggingInvaders (1|enable)|(0|disable)

Basic usage:

add GOBLIN:registers the race GOBLIN as a digging invader. Case-sensitive.
remove GOBLIN:unregisters the race GOBLIN as a digging invader. Case-sensitive.
now:makes invaders try to dig now, if plugin is enabled
clear:clears all digging invader races
edgesPerTick n:makes the pathfinding algorithm work on at most n edges per tick. Set to 0 or lower to make it unlimited.

You can also use diggingInvaders setCost (race) (action) n to set the pathing cost of particular action, or setDelay to set how long it takes. Costs and delays are per-tile, and the table shows default values.

Action Cost Delay Notes
walk 1 0 base cost in the path algorithm
destroyBuilding 2 1,000 delay adds to the job_completion_timer of destroy building jobs that are assigned to invaders
dig 10,000 1,000 digging soil or natural stone
destroyRoughConstruction 1,000 1,000 constructions made from boulders
destroySmoothConstruction 100 100 constructions made from blocks or bars

fastdwarf

Controls speedydwarf and teledwarf. Speedydwarf makes dwarves move quickly and perform tasks quickly. Teledwarf makes dwarves move instantaneously, but do jobs at the same speed.

fastdwarf 0:disables both (also 0 0)
fastdwarf 1:enables speedydwarf and disables teledwarf (also 1 0)
fastdwarf 2:sets a native debug flag in the game memory that implements an even more aggressive version of speedydwarf.
fastdwarf 0 1:disables speedydwarf and enables teledwarf
fastdwarf 1 1:enables both

See superdwarf for a per-creature version.

forceequip

Forceequip moves local items into a unit’s inventory. It is typically used to equip specific clothing/armor items onto a dwarf, but can also be used to put armor onto a war animal or to add unusual items (such as crowns) to any unit.

For more information run forceequip help. See also modtools/equip-item.

lair

This command allows you to mark the map as a monster lair, preventing item scatter on abandon. When invoked as lair reset, it does the opposite.

Unlike reveal, this command doesn’t save the information about tiles - you won’t be able to restore state of real monster lairs using lair reset.

Options:

lair:Mark the map as monster lair
lair reset:Mark the map as ordinary (not lair)

mode

This command lets you see and change the game mode directly.

Warning

Only use mode after making a backup of your save!

Not all combinations are good for every situation and most of them will produce undesirable results. There are a few good ones though.

Examples:

  • You are in fort game mode, managing your fortress and paused.
  • You switch to the arena game mode, assume control of a creature and then
  • switch to adventure game mode(1). You just lost a fortress and gained an adventurer. Alternatively:
  • You are in fort game mode, managing your fortress and paused at the esc menu.
  • You switch to the adventure game mode, assume control of a creature, then save or retire.
  • You just created a returnable mountain home and gained an adventurer.

strangemood

Creates a strange mood job the same way the game itself normally does it.

Options:

-force:Ignore normal strange mood preconditions (no recent mood, minimum moodable population, artifact limit not reached).
-unit:Make the strange mood strike the selected unit instead of picking one randomly. Unit eligibility is still enforced.
-type <T>:Force the mood to be of a particular type instead of choosing randomly based on happiness. Valid values for Tare “fey”, “secretive”, “possessed”, “fell”, and “macabre”.
-skill S:Force the mood to use a specific skill instead of choosing the highest moodable skill. Valid values are “miner”, “carpenter”, “engraver”, “mason”, “tanner”, “weaver”, “clothier”, “weaponsmith”, “armorsmith”, “metalsmith”, “gemcutter”, “gemsetter”, “woodcrafter”, “stonecrafter”, “metalcrafter”, “glassmaker”, “leatherworker”, “bonecarver”, “bowyer”, and “mechanic”.

Known limitations: if the selected unit is currently performing a job, the mood will not be started.

siege-engine

Siege engines in DF haven’t been updated since the game was 2D, and can only aim in four directions. To make them useful above-ground, this plugin allows you to:

  • link siege engines to stockpiles
  • restrict operator skill levels (like workshops)
  • load any object into a catapult, not just stones
  • aim at a rectangular area in any direction, and across Z-levels

The front-end is implemented by gui/siege-engine.

power-meter

The power-meter plugin implements a modified pressure plate that detects power being supplied to gear boxes built in the four adjacent N/S/W/E tiles.

The configuration front-end is implemented by gui/power-meter.

steam-engine

The steam-engine plugin detects custom workshops with STEAM_ENGINE in their token, and turns them into real steam engines.

The vanilla game contains only water wheels and windmills as sources of power, but windmills give relatively little power, and water wheels require flowing water, which must either be a real river and thus immovable and limited in supply, or actually flowing and thus laggy.

Compared to the water reactor exploit, steam engines make a lot of sense!

Construction

The workshop needs water as its input, which it takes via a passable floor tile below it, like usual magma workshops do. The magma version also needs magma.

Due to DFHack limits, the workshop will collapse over true open space. However down stairs are passable but support machines, so you can use them.

After constructing the building itself, machines can be connected to the edge tiles that look like gear boxes. Their exact position is extracted from the workshop raws.

Like with collapse above, due to DFHack limits the workshop can only immediately connect to machine components built AFTER it. This also means that engines cannot be chained without intermediate axles built after both engines.

Operation

In order to operate the engine, queue the Stoke Boiler job (optionally on repeat). A furnace operator will come, possibly bringing a bar of fuel, and perform it. As a result, a “boiling water” item will appear in the t view of the workshop.

Note

The completion of the job will actually consume one unit of the appropriate liquids from below the workshop. This means that you cannot just raise 7 units of magma with a piston and have infinite power. However, liquid consumption should be slow enough that water can be supplied by a pond zone bucket chain.

Every such item gives 100 power, up to a limit of 300 for coal, and 500 for a magma engine. The building can host twice that amount of items to provide longer autonomous running. When the boiler gets filled to capacity, all queued jobs are suspended; once it drops back to 3+1 or 5+1 items, they are re-enabled.

While the engine is providing power, steam is being consumed. The consumption speed includes a fixed 10% waste rate, and the remaining 90% are applied proportionally to the actual load in the machine. With the engine at nominal 300 power with 150 load in the system, it will consume steam for actual 300*(10% + 90%*150/300) = 165 power.

Masterpiece mechanism and chain will decrease the mechanical power drawn by the engine itself from 10 to 5. Masterpiece barrel decreases waste rate by 4%. Masterpiece piston and pipe decrease it by further 4%, and also decrease the whole steam use rate by 10%.

Explosions

The engine must be constructed using barrel, pipe and piston from fire-safe, or in the magma version magma-safe metals.

During operation weak parts get gradually worn out, and eventually the engine explodes. It should also explode if toppled during operation by a building destroyer, or a tantruming dwarf.

Save files

It should be safe to load and view engine-using fortresses from a DF version without DFHack installed, except that in such case the engines won’t work. However actually making modifications to them, or machines they connect to (including by pulling levers), can easily result in inconsistent state once this plugin is available again. The effects may be as weird as negative power being generated.